|
TECHNICAL SPECIFICATIONS
Adhesive P5
Product: StyroTrim® Adhesive P5. This
thick adhesive is made specifically for StyroTrim® by NMC America, Inc, 7000 Central Parkway, Suite 1501, Atlanta, GA
30328.
Technical properties:
Base: Synthetic dispersion
Consistency: Thick
Polymerization: Physical Polymerization
Open time: 10 - 15 minutes.
Drying time: 24 hours approx.
Density: 112 pounds / cu ft (1.8g/ml)
Temperature resistance: -4ºF to 158°F (-20°C to +70°C) (after hardening)
Characteristics:
Solvent free. Stays slightly elastic after drying.
Applications:
Gluing extruded or expanded polystyrene and polyurethane on walls and ceilings
where the substrate is porous.
Packaging:
Color: beige. Container: 285 ml cartridge, 1 and 5 kg tubs.
Shelf-life:
24 months in its closed packaging in a dry, cool environment, at temperatures
between 41°F and 77°F (+5°C and +25°C).
Substrates:
Type: Porous substrates, e.g. bricks, concrete, plaster. Conditions: clean,
dry, grease free.
Method of use:
Application: With a gun (cartridge) or with a spatula. Coat the surfaces of
the product to be glued with the adhesive,
position the product on the substrate and press firmly.
Temperature of application: 41°F to 86°F (+5°C to +30°C)
Cleaning product: Water.
Joints: Maintain a gap of from 1/16 to 1/8" (2 to 3 mm) between each section.
Safety measures: Usual working hygiene.
Comment: A porous substrate is to be preferred.
Note: This technical data sheet has been drafted in accordance with the
current state of our knowledge. We reserve the right to make changes without
prior notice. Without a written agreement to the contrary, our studies,
descriptions, notices, advice or other technical documents concerning the
functionality, behaviour or performance of goods are supplied as an indication
only according to the common use of the goods under normal conditions of
application, use and climate (USA temperate regions), or those indicated to us
by customers in writing. Save for existence of fraud or gross negligence on
our part, these studies, recommendations and other technical documents do not
engage our liability. It is the customer's responsibility to check that they
are suitable for the intended use.
|
